Retsch Emax - Manual (Page 46)

Control panel software – controlling the device
46
6.6.2 Selecting saved programs
• Tap on the headings field (B2.4).
– The program selection window opens.
– The current program is shown with a grey background.
• Tap on an icon to open the program description of the respective
program.
• Tap on the desired program.
– The program selection window closes and the relevant program is loaded.
6.6.3 Editing and saving the program
In the program mode you can only change parameters if you have activated
editing.
• Tap on the icon (B2.2) to edit the grinding parameters saved in the
program.
The parameters are set as describing in the “Grinding parameters” chapter.
•
Tap on CANCEL to cancel editing without saving entries.
– The entries are not saved, and the menu displays the previous screen.
• Tap on SAVE to save the entries.
– The entries are saved, and the menu displays the previous screen.
6.7 Sequences
For special grinding tasks you can collate your previously saved programs into a
sequence in this mode. This enables you to design very complex grinding
processes.
–
A sequence is made up of a number of freely selectable programs.
– You can repeat programs.
– You can save up to three sequences.