Retsch Emax User Manual
Page 57
Advertising
Cleaning, wear and service
57
Fig. 38: Removing the pipe
5.
After stopping the device you can remove and clean the pipe (TR).
6.
Also clean the base (TB).
7.
Reinsert the pipe (TR).
–
Ensure the seal is firmly in place.
8.
Screw in the sealing screw (DS).
8.4.1.2
Rinsing the cooling system
1.
Fill with fresh, clean, lime-free tap water (maximum cooling agent volume
600ml).
Fig. 39: Maximum and minimum fill levels
2.
Start the device up for 1 minute at a speed of 300 revolutions per minute
(with two grinding jars).
min.
max.
Maximum cooling agent
volume: 600ml
TR
TB
Advertising