Retsch Emax - Manual (Page 48)

Control panel software – controlling the device
48
22.04.2014
14:23
PROGRAM
10 | Aluminium oxide
B2.2
• Tap on an icon to open the sequence description of the respective
sequence.
• Tap on the desired sequence.
– The sequence selection is closed and the relevant sequence is loaded.
6.7.4 Editing and saving a sequence
You can only change the program compilation of a sequence if you have activated
editing.
• Tap on the icon (B5.2) to edit the programs saved in the sequence.
The process times of all programs saved in the sequence are added together and
shown in the process time display.
After editing:
•
Tap on CANCEL to cancel editing without saving entries.
– The entries are not saved, and the menu displays the previous screen.
• Tap on SAVE to save entries.
– The entries are saved, and the menu displays the previous screen.
6.7.4.1 Adding or changing a program to the sequence
• Tap on the last line in the memory that can be edited and which is shown by
[
– ].
– The list of all saved programs appears.
• Tap on an icon to open the program description of the respective
program.
• Tap on the line for the desired program.
– The program is added to the sequence and the menu displays the previous
screen.
6.7.4.2 Removing a program from the sequence
• Tap on the line in the memory showing the program you wish to remove.
– The list of all saved programs appears.
• Tap on the top line (no program).
– The program is removed from the sequence and the menu displays the
previous screen.
6.8 Service menu
The service menu can be accessed from any operating mode.
• Press and hold the time and date field (B2.2).
– The service menu is displayed full screen.