Retsch Emax - Manual (Page 31)

Operating the machine
31
Fig. 16: Closing the hood
NOTICE
Hood is not closed
Automatic locking has not engaged
–
If the hood has not closed sufficiently when it is closed, the automatic lock
cannot engage.
• Open the automatic locking:
To open the device, tap on the OPEN button (B3.1).
• Use a little force to press the hood downwards until you notice that
the automatic locking has closed the lid.
5.4 Emergency unlocking
CAUTION
Emergency Unlocking
Drive continuing to run
–
There is a substantial risk of injury if the drive and associated device parts
run on a long time without being braked!
• Activate the emergency unlocking only when the machine has come
to a complete stop and is disconnected from the power supply.
Electrical unlocking is not possible in the case of a power outage.
–
Open the hood with the release mechanism (Eh) .
Fig. 17: Position of the emergency release
Eh