Control panel software – controlling the device – Retsch Emax User Manual
Page 52
Control panel software
– controlling the device
52
-
Controller (firmware)
-
Display
•
Tap on the desired update.
NOTICE
A suitable USB data medium with controller and display software must be
connected to the device. The controller and display software must be in the root
directory. The device then automatically recognises the new software.
6.8.9
User information
The following information about the device can be found under user information:
- Accessories
- Spare parts
- User manual
6.8.10 IR sensor calibration
Fig. 35: IR sensor calibration
You can calibrate the IR sensor in this menu.
This is used to measure the temperature of the grinding jar and to adjust it where
necessary.
•
Select the field in which you want to adjust the temperature.
6.8.11 Service environment (password protected)
This function can only be accessed by Retsch service technicians.