RKI Instruments Beacon 110 Rig Monitor - Manual (Page 41)

Beacon 110 Rig Monitor Operator’s Manual 36
Parts List
Table 8 lists replacement parts and accessories for the Beacon 110 Rig Monitor.
Table 8: Parts List
Part Number Description
06-1248RK-03 Sample tubing for calibration, 3 foot length
07-0033RK Detector housing cap gasket
07-0203RK Rubber retaining boot
14-2101RK Spacer between H
2
S sensor and rubber boot
18-0061RK Cable bushing
18-0107RK Conduit hub (3/4 in)
18-0400RK-01 Junction box with rubber spacers
43-0440RK Reset Switch
43-4165RK Fuse, 1/4” x 1 1/4”, fast acting, 3A, 250 V
51-0096RK Strobe/horn, 10-33 VDC, NEMA 4X
52-1016RK Buzzer
65-2427RK-05 H
2
S sensor with j-box (does not include cable and cable bushing)
65-2428 H
2
S detector (with plug-in sensor)
71-0232RK Beacon 110 Rig Monitor Operator’s Manual (this document)
81-0151RK-02 Calibration cylinder, 25 PPM H
2
S in nitrogen, 58 liter steel
81-0064RK-04 Calibration cylinder, 25 PPM H
2
S in nitrogen, 34 liter steel
81-0076RK Zero air calibration cylinder, 17 liter steel
81-0076RK-01 Zero air calibration cylinder, 34 liter steel
81-0076RK-03 Zero air calibration cylinder, 103 liter steel
81-1050RK Regulator with gauge and knob, 0.5 LPM, for 17 liter and 34 liter steel cali-
bration cylinders
81-1051RK Regulator with gauge and knob, 0.5 LPM , for 34AL/58/103 liter calibration
cylinders
81-1116RK Calibration cup/splash guard
ES-1537-H2S H
2
S replacement sensor