Doorlite & designline panel installation – Therma-Tru SHOP 3 Door Preparation - U1 Revised User Manual
Page 39
Advertising
Door
Preparation
Shop 3
2014 (U1 REVISED)
3.39
Doorlite & Designline
Panel Installation
Drive Screws with #2
Phillips Bit
Ensure frame edges are well-seated.
NOTE:
Doorlites may be shipped with only
enough screws for safe transport.
Additional screws may be made up
from bulk supply.
Adjust Screwgun Torque
CAUTION:
DO NOT exceed
maximum torque.
MAXIMUM AND MINIMUM TORQUE SETTINGS
Doorlite
Torque
(in-lbs)
Fiber-Classic, Smooth-Star & Steel
Classic-Craft Wrought Iron & Impact
Classic-Craft
9-12
67-70
12-14
Advertising