Door slab resizing – Therma-Tru SHOP 3 Door Preparation - U1 Revised User Manual
Page 8
Advertising
Door
Preparation
3.8
2014 (U1 REVISED)
Shop 3
Door Slab Resizing
Scribe mark
Cut New Rail Pocket
Remove core material to desired depth
using wire brush on a drill.
Cut to scribe marks at ends.
Cut flush to inside skin faces.
Clean Up New Rail Pocket and Test-Fit
Clean up corners and/or fiberglass
skin ribs with a chisel.
Scrape skin faces clean to ensure
a good adhesive bond.
Test-fit rail in pocket.
Advertising