Modes of operation, Modes of operation -6 – Rockwell Automation 22-COMM-C ControlNet Adapter User Manual
Page 18
1-6
Getting Started
The adapter uses four status indicators to report its operating status. They
can be viewed on the adapter or through the drive cover (
Figure 1.2 Status Indicators (location on drive may vary)
Modes of Operation
Item
Status
Indicator
Normal
Status
(1)
(1)
If all status indicators are off, the adapter is not receiving power. Refer to
, for instructions on installing the adapter.
If any other conditions occur, refer to
Description
➊
PORT
Green
Normal Operation. The adapter is properly connected and
is communicating with the drive.
➋
MOD
Green
Normal Operation. The adapter is operational and is
transferring I/O data.
Flashing
Green
Normal Operation. The adapter is operational but is not
transferring I/O data.
➌
➍
NET A or
NET B
Green
Normal Operation. The adapter channel is properly
connected and communicating on the network.
Flashing
Green
Normal Operation. The adapter channel has a temporary
error, or is in listen-only mode.
Off
Normal Operation. The adapter channel is disabled or not
supported.
➌
➍
➊
➋
➌
➍
➊
➋
Bottom side
of adapter board