Rockwell Automation 22-COMM-C ControlNet Adapter - Manual (Page 27)

Chapter
3
Configuring the Adapter
Chapter 3 provides instructions and information for setting the
parameters in the adapter.
For a list of parameters, refer to Appendix B , Adapter Parameters . For
definitions of terms in this chapter, refer to the Glossary .
The adapter stores parameters and other information in its own
non-volatile memory. You must, therefore, access the adapter to view
and edit its parameters. The following tools can be used to access the
adapter parameters:
Topic Page
Configuration Tools 3-1
Using the PowerFlex 4-Class HIM 3-2
Setting the Node Address 3-3
Setting the I/O Configuration 3-3
Setting a Fault Action 3-4
Resetting the Adapter 3-6
Viewing the Adapter Configuration 3-7
Configuration Tools
Tool Refer to…
PowerFlex 4-Class HIM
(22-HIM-*) page 3-2
DriveExplorer Software
(version 3.01 or higher) http://www.ab.com/drives/driveexplorer, and
DriveExplorer online help (installed with the software)
DriveExecutive Software
(version 3.01 or higher) http://www.ab.com/drives/drivetools, and
DriveExecutive online help (installed with the software)