Rockwell Automation 22-COMM-B PowerFlex BACnet MS/TP Adapter - Manual (Page 29)

Chapter
3
Configuring the Adapter
This chapter provides information and instructions for setting the
parameters in the adapter.
For a list of parameters, refer to Appendix B , Adapter Parameters . For
definitions of terms in this chapter, refer to the Glossary .
The adapter stores parameters and other information in its own
Non-Volatile Storage (NVS) memory. You must, therefore, access the
adapter to view and edit its parameters. The following tools can be used
to access the adapter parameters:
Topic Page
Configuration Tools 3-1
Using the Optional, External PowerFlex 4-Class HIM 3-2
Setting the Device Instance Number 3-4
Setting a Comm Loss Action 3-6
Setting the Comm Loss Time 3-7
Setting the Baud Rate 3-8
Resetting the Adapter 3-9
Viewing the Adapter Status Using Parameters 3-10
Flash Updating the Adapter 3-10
Configuration Tools
Tool Refer to…
PowerFlex 4-Class HIM
(22-HIM-A3 or 22-HIM-C2S) page 3-2
DriveExplorer Software
(version 3.01 or later) http://www.ab.com/drives/driveexplorer , and
DriveExplorer online help (installed with the software)
DriveExecutive Software
(version 3.01 or later) http://www.ab.com/drives/drivetools , and
DriveExecutive online help (installed with the software)