Rockwell Automation 20-COMM-S RS-485 DF1 Adapter - Manual (Page 18)

2-4 Installing the Adapter
1. Remove power from the drive.
2. Use static control precautions.
3. Connect the Internal Interface cable to the DPI port on the drive and
then to DPI connector on the adapter.
Figure 2.4 DPI Ports and Internal Interface Cables
Connecting the Adapter to the Drive
# Description # Description
➊ 15.24 cm (6 in.) Internal Interface cable ➌ RS-485 connector
➋ DPI connector ➍ 2.54 cm (1 in.) Internal Interface cable
PowerFlex 70 Drive
PowerFlex 700 Drive
0 - 1 Frame PowerFlex 700 Drive
2 Frame & Larger
RS-485 DF1 Adapter
➋
➌
➍
➊