Rockwell Automation 20-COMM-S RS-485 DF1 Adapter - Manual (Page 22)

3-2 Configuring the Adapter
With DriveExplorer software, you can edit parameters in both the
1203-SSS serial converter and the connected product. On
PowerFlex 70 and PowerFlex 700 drives (or other DPI products), you
can also edit parameters in any of the attached peripherals, such as the
20-COMM-S. DriveExplorer Lite is shipped with the 1203-SSS serial
converter. It is a free, limited-feature version of DriveExplorer.
DriveExplorer Lite Quick Start
This section is designed to help users start using DriveExplorer Lite. If
you are unsure how to complete a step, refer to the online help (select
Help > Help Topics) or the DriveExplorer Getting Results Manual,
Publication 9306-5.2, which is included on the CD.
Figure 3.1 DriveExplorer
Using DriveExplorer
Step
1
Select Explore > Configure Communication. Select the communications port
and baud rate that you are using. Select either checksum and accept the default
time for the time-out.
2 Select Explore > Connect > Local. A node eventually appears under Devices.
3 In the left pane, click the + signs to expand the tree. Click the product or serial
converter to display parameters in the right pane. Double-click a parameter to edit
it.