Rockwell Automation 160 RSI SERIAL COMM MODULE - Manual (Page 45)

Appendix
B
RS1 Module Compatibility
The 160-RS1 Module has been tested and found to be compatible
with the following Allen-Bradley products:
• MicroLogix 1000
Protocol Point-to-Point
PCCC Command 0xA1 Protected Type Logical Read with 2 Address Fields
0xA9 Protected Type Logical Write with 2 Address Fields
Hand Shaking None
Cable See Chapter 3 for details
Versions Series D, FRN 1.0 or later
• SLC 500
Protocol Point-to-Point/Multi-Drop Master
PCCC Command 0xA2 Protected Type Logical Read with 3 Address Fields
0xAA Protected Type Logical Write with 3 Address Fields
Hand Shaking None
Cable 9 Pin - 9 Pin ( see Chapter 3 for details)
Versions Series B, FRN 7 (OS 4.01) or later
• 1761-NET-AIC+
Protocol Multi-Drop
PCCC Command All (see Chapter 5 for details)
Hand Shaking None
Cable 9 Pin - 9 Pin
Versions Series A
• PLC-5 Enhanced
Protocol Point-to-Point/Multi-Drop Master
PCCC Command 0x67 Typed Write (Logical ASCII Addressing only)
0x68 Typed Read (Logical ASCII Addressing only)
Hand Shaking None
Cable 9 Pin - 25 Pin ( see Chapter 3 for details)
Versions Series C, FRN E or later
• RSLinx™
Protocol Point-to-Point/Multi-Drop
PCCC Command 0xA1 Protected Type Logical Read with 2 Address Fields
0xA9 Protected Type Logical Write with 2 Address Fields
Hand Shaking None
Cable PC Cable ( see Chapter 3 for details)
Versions 1.7.62.00 or later
• DriveExplorer
Protocol Point-to-Point
PCCC Command 0x67 Typed Write (Logical ASCII Addressing only)
0x68 Typed Read (Logical ASCII Addressing only)
Hand Shaking None
Cable PC Cable ( see Chapter 3 for details)
Versions 1.01.10 or later
• DriveTools32™
Protocol Point-to-Point
PCCC Command 0x67 Typed Write (Logical ASCII Addressing only)
0x68 Typed Read (Logical ASCII Addressing only)
Hand Shaking None
Cable PC Cable ( see Chapter 3 for details)
Versions 2.01 or later