Rockwell Automation 825P Modular Protection System Quick Start Guide - Manual (Page 15)

Quick Start Guide — Allen-Bradley Bulletin 825-P Modular Protection System
15 15
Programming
Operational
Parameters Use the following path with the front panel programming keys to access the
operational parameter settings:
MAIN > Set/Show > Relay > [Group]
See Appendix A for more details
Table D: Operational Parameters
Group Description
Main Settings Basic system settings related to three-phase power source (e.g. line voltage
rating and frequency), motor rated current, and transformer (current and
voltage) data.
I/O Settings Settings related to configuration of the optional analog output.
Trip Inhibit Settings to configure the blocking of tripping functions. These settings
coordinate with assignment of a discrete input for “Block Protection”.
Relay Behavior Settings for configuring the output relays.
Timer Settings On-delay and off-delay timer settings for enhanced control capability of the
auxiliary output relays.
Front Panel Settings Settings for controlling the front panel LCD operation.
Display Settings
Settings to select data that is displayed in the rotating status