Rockwell Automation 825P Modular Protection System Quick Start Guide - Manual (Page 3)

Quick Start Guide — Allen-Bradley Bulletin 825-P Modular Protection System
3 3
Attention statements help you to:
• Identify a hazard
• Avoid a hazard
• Recognize the consequences
Trademark List
DeviceNet and the DeviceNet logo are trademarks of the Open Device Vendors
Association (ODVA).
Microsoft Windows is a registered trademark of the Microsoft Corporation.
European
Communities (EC) Directive Compliance
The 825-P Modular Protection System is CE marked for installation within the
European Union and EEA regions. It has been designed and tested to meet the
following directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EEC Electromagnetic
Compatibility (EMC) by applying the following standards, in whole:
• EN 60947-4-1 — Low-Voltage Switchgear and Controlgear: Part 4: Contactors
and Motor Starters - Section 1: Electromechanical Contactors and Motor
Starters
• EN 60947-5-1 — Low-Voltage Switchgear and Controlgear: Part 5: Control
Circuit Devices and Switching Elements - Section 1: Electromechanical
Control Circuit Devices
This product is intended for use in an industrial environment.
IMPORTANT
Identifies information that is critical for successful
application and understanding of the product.
TIP
This product has been designed for environment A (heavy
industrial). Use of this product in environment B (light
industrial or domestic) can cause unwanted electromagnetic
disturbances in which case the user could be required to
take adequate mitigation measures.