Quick start guide – Rockwell Automation 825P Modular Protection System Quick Start Guide User Manual
Page 9
Advertising
Quick Start Guide
—
Allen-Bradley Bulletin 825-P Modular Protection System
9
9
Figure 6 Voltage Connections (Optional Card Cat. No. 825-PVS required)
Figure 7 Input/Output
Slots C, D and E are for option cards. Rated supply voltage is 110...240V AC or 110...250V DC
IMPORTANT
Be sure to properly label and connect the Trip relay
terminals according to the programmed behavior; factory
default setting is “Fail-Safe”.
Advertising