Rockwell Automation 21G 750-Series POD Remote Mounting Kit - Manual (Page 10)

Rockwell Automation Publication 750-IN015B-EN-P - September 2011
10 PowerFlex 750-Series Control Pod Remote Mounting Kit
Mount and Wire the Control
Pod When selecting a remote location for the control pod, note that the total length
of each wiring harness provided is 23 m (75 ft).
1. Drill 3.2 mm (0.13 in.) pilot holes in the control pod mounting surface.
2. Mount the control pod using the four M4 x 12 mm self-tapping screws
provided.
P2 (Phillips®)
Firmly Seat