Rockwell Automation 21G 750-Series POD Remote Mounting Kit - Manual (Page 8)

Rockwell Automation Publication 750-IN015B-EN-P - September 2011
8 PowerFlex 750-Series Control Pod Remote Mounting Kit
5. Loosen the captive screws on the back panel of the control pod until they
release from the converter control panel.
6. Rotate the control pod to expose the hinge.
7. Remove the four M4 x 12 mm screws that secure the control pod to the
converter control panel right side wall and remove the control pod. If
desired, the hinge can be removed from the control pod.
T20 or F - 6.4 mm (0.25 in.)
1.8 N•m (16 lb•in)
T20 or F - 6.4 mm (0.25 in.)
1.8 N•m (16 lb•in)