Rockwell Automation 21G 750-Series POD Remote Mounting Kit - Manual (Page 5)

Rockwell Automation Publication 750-IN015B-EN-P - September 2011
PowerFlex 750-Series Control Pod Remote Mounting Kit 5
Minimum Clearances The control pod must be mounted in a vertical orientation as shown and must
make full contact with the mounting surface.
• Do not use standoffs or spacers.
• Inlet air temperature must not exceed 50 °C (122 °F).
• Enclosure is rated IP00, NEMA/UL Open Type.
76.2 mm (3.0 in.)
76.2 mm (3.0 in.) Airflow through the control pod
must not be impeded.