Rockwell Automation 21G 750-Series POD Remote Mounting Kit - Manual (Page 2)

Rockwell Automation Publication 750-IN015B-EN-P - September 2011
2 PowerFlex 750-Series Control Pod Remote Mounting Kit
General Precautions Read the following precautions before you begin working on the drive.
Qualified Personnel
Personal Safety
Product Safety
Class 1 LED Product
ATTENTION: Only qualified personnel familiar with adjustable frequency
AC drives and associated machinery should plan or implement the
installation, start-up and subsequent maintenance of the system. Failure
to comply may result in personal injury and/or equipment damage.
ATTENTION: To avoid an electric shock hazard, verify that the voltage on
the bus capacitors has discharged completely before servicing. Measure
the DC bus voltage at the -DC and +DC TESTPOINT sockets on the front of
the power module (see
Removing Power from the Drive on page 4 for
location).
ATTENTION: This drive contains ESD (Electrostatic Discharge) sensitive
parts and assemblies. Static control precautions are required when
installing, testing, servicing or repairing this assembly. Component
damage may result if ESD control procedures are not followed. If you are
not familiar with static control procedures, reference Guarding Against
Electrostatic Damage, publication 8000-4.5.2 or any other applicable ESD
protection handbook.
ATTENTION: Hazard of permanent eye damage exists when using optical
transmission equipment. This product emits intense light and invisible
radiation. Do not look into module ports or fiber-optic cable connectors.