Rockwell Automation 21G 750-Series POD Remote Mounting Kit - Manual (Page 3)

Rockwell Automation Publication 750-IN015B-EN-P - September 2011
PowerFlex 750-Series Control Pod Remote Mounting Kit 3
Commonly Used Tools Service Tools
This list covers the tools needed for kit installation.
Fastener/Tool/Torque
Information The disassembly illustrations in this publication identify the type of fastener,
tool, and tightening torque used for disassembly/assembly of components in the
drive:
IMPORTANT Care must be taken to ensure that tools and/or hardware components do
not fall into open drive assemblies. Do not energize the drive unless all
loose tools and/or hardware components have been removed from the
drive assemblies and enclosure.
Tool Description Details
ESD-protected place of work Working surface, Floor covering, seat and ground connections
ESD-protective clothing Wrist wrap, shoes, overall clothing (coat)
Multi meter Digital multi meter, capable of ac and dc voltage, continuity,
resistance, capacitance measurements, and forward diode bias
tests. Fluke model 87 III or equivalent.
Flat nose screw driver 5 mm (0.19 in.), 6.4 mm (0.25 in.)
Hexalobular screw driver/bit #20, #25
Phillips® screw driver/bit
(1)
(1) Phillips® is a registered trademark of the Phillips Screw Company.
#2
Torque wrench 1...12 N•m (8.8…106 lb•in)
Tool Type and Size:
Px Phillips screw driver/bit and size
Txx Hexalobular screw driver/bit and size
Tightening Torque
Fastener Type:
Phillips® head screw (1)
Slotted Hexalobular head screw
Fastener/Tool/Torque Information:
T20 or F - 6.4 mm (0.25 in.)
1.8 N•m (16 lb•in)