Rockwell Automation 21G 750-Series POD Remote Mounting Kit - Manual (Page 12)

Rockwell Automation Publication 750-IN015B-EN-P - September 2011
12 PowerFlex 750-Series Control Pod Remote Mounting Kit
7. Connect the internal 24V power connection to the converter terminal
block TB1 mounted on the converter control panel right side wall.
8. Connect the inverter fiber-optic cable to the INV fiber-optic transceiver
on the inverter power layer interface board.
➊
➌
➌
➌
➋
T20 or F - 6.4 mm (0.25 in.)
1.8 N•m (16 lb•in)
No. Name Description
➊ Internal 24V Power Connection Three point connector to converter terminal block TB1
power supply connection.
➋ Inverter Fiber-optic Connection Fiber-optic cable connector to INV fiber-optic cage on
power layer interface board in card cage.
➌ Cable Supports Twist-Lock cable supports supplied.