Rockwell Automation 21G 750-Series POD Remote Mounting Kit - Manual (Page 13)

Rockwell Automation Publication 750-IN015B-EN-P - September 2011
PowerFlex 750-Series Control Pod Remote Mounting Kit 13
Optional External Power Supply
Connect an optional external 24V power supply to P13 using the three position
connector supplied.
External Power Supply Connections
Install Covers 1. Replace the control pod cover.
Power Block Terminal Name Description
1 +24 Volt Auxiliary Power Connections for customer supplied power
supply: 24V DC ±10%, 5 A, PELV (Protective
Extra Low Voltage) or SELV (Safety Extra
Low Voltage)
2 Auxiliary Power Common
3 Shield Terminating point for wire shields.
P13
3 2 1
T20 or F - 6.4 mm (0.25 in.)
1.8 N•m (16 lb•in)