Rockwell Automation 445L Installation and Operating Instructions - Manual (Page 22)

R
Muting Controller Box Installation and Operating Instructions
22
Original instructions
Adjustment
Step 6
Adjustment of the Safety Light Curtain
Step 7
Position the emitter and receiver light curtain at the same height
on the mounting column.
Fully tighten the light curtain mounting screws.
General
First, adjust the horizontal angle of the floor mounting plate.
Second, adjust the light curtain vertical axis (left-right) and vertical
front-back-axis of the stand. However, the lighting of the green LED
on the light curtain indicates that the protective field is
uninterrupted and the light curtain aligned.
Premount the column with the floor mounting plate on the
floor.
Adjust (with the floor plate adjustment screws) the position of
the mounting column after mounting a light curtain.
When the light curtain indicates uninterrupted protective
field, mount the mounting screws on the floor plate.
Light curtain Tx Light curtain Rx