Rockwell Automation 445L Installation and Operating Instructions - Manual (Page 7)

Muting Controller Box Installation and Operating Instructions
7
R
Original instructions
Two Sensor Muting with GuardShield 440L
Muting of Laser Scanners or Other Safety Sensors
Figure 4: Wiring two sensor muting (T-Type or L-Type) with GuardShield 440L
When using other safety devices in a muting
system, the configuration of the MSR42 must
be changed according to the Software and
Optical Interface section on page 14.
Figure 5: Two sensor muting of a laser scanner or other safety devices with PNP output
GuardShield 440L Rx
GuardShield 440L Tx
Tx Micro 400 Rx Micro 400
S1
Muting sensors
with reflectors
Rx-GS
Control
Cabinet
S2
Tx-GS/Tx-S4
S3
Rx-S4
S4
Outputs
PWR
I/O
Muting
Lamp
ATTENTION