Rockwell Automation 1413-CAP-ME-PE Capacitor Bank Controller, Series C - Manual (Page 40)

40 Rockwell Automation Publication 1413-UM001D-EN-P - November 2010
Chapter 3 Configuration
If the menu items shown in the figure below are not displayed on the Main
Menu screen, you need to scroll down the screen by pressing the Down key.
2. Press the OK key on the LCD keypad.
The Advanced Set Menu screen is displayed, as shown below.
3. If ENET Cfg is selected, press the OK key, otherwise, select ENET Cfg by
using the Up and Down keys, and then press the OK key.
The Ethernet Configuration screen is displayed.
4. Press the OK key on the LCD Status menu.
When an IP address is not yet assigned to your controller, only the MAC
address that is assigned to your controller, represented as
XXXXXXXXXXXX below, is displayed.