Rockwell Automation 1413-CAP-ME-PE Capacitor Bank Controller, Series C - Manual (Page 54)

54 Rockwell Automation Publication 1413-UM001D-EN-P - November 2010
Chapter 3 Configuration
As a minimum, the following configurations are required.
• Configuration is the number of steps configured with Discharge time, lead
and/or lag settings.
• Configuration 1 and 2 are Nominal voltage, Voltage high/low limits,
Powerfactor timers, samples to average, and Input modes.
• Step Control configures all the steps in the appropriate mode.
• Operating mode is one of the three Automatic modes, FILO, Balanced, or
Best Fit.