Rockwell Automation 1413-CAP-ME-PE Capacitor Bank Controller, Series C User Manual
Page 51
Rockwell Automation Publication 1413-UM001D-EN-P - November 2010
51
Configuration Chapter 3
11.
Set the Step Control to Manual or Auto.
This screen shows the step control of the Capacitor
Bank controller. Step Control screens let you place a step
in Auto (A) or Manual (M) mode.
When using the Balanced, Best Fit, or FILO operating
mode, make sure all the steps are in Auto mode. Just
pressing the step will toggle the step in Auto (A) or
Manual (M) mode.
The first row (from the left) is to configure the step; the
second row is the status of step (A or M).
The third row is Manual command. You can press the
respective step and if it is in Manual mode you can turn
that step On or Off.
The second-last row indicates On/Off status of each
step. The last row shows discharging status. If a
Capacitor Bank is discharging, it will show a flashing ‘D’.