Rockwell Automation 1500 Modular Protection System Conversion Kit (GE Multilin to Bulletin 825 Plus) - Manual (Page 21)

1500-IN059C-EN-E – June 2013
Installation 4-7
Re-Installing the Low Voltage Door
1. Reinstall the low voltage door. Caution must be taken when re-installing
the door. It is recommended that two people remount the door – one
person to hold the door and a second person to replace the hinge pins.
(Figure 4.19)
Ensure sufficient personnel are present to safely replace
the low voltage door. Failure to do so may result in
personal injury and/or damage to the equipment.
2. Remount all door-mounted devices that were removed.
(Figure 4.20)
Figure 4.19
Figure 4.0
ATTENTION