Rockwell Automation 937CU-AITXF-DC1 Transmitter Supply Converter Installation Instructions - Manual (Page 28)

2 6
Bul. 937C Transmitter Supply Converter Installation Instructions
Start value —— 7.5.3
End value —— 7.5.3
Inverted —— Inverted
Normal
Characteristic
With the parameters Start value and End value establish a sub-range of the input signal as the measuring
range of the application. This measuring range is formed linearly on the output signal.
The following table shows, for the various characteristics, the conversion of the Start value and End value
and the behaviour during measuring overrange.
• The statements apply for the setting Inverted το Normal.
• If you select Inverted to Inverted, the conversion of Start value and End value are reversed. The
start value is thus converted to 20 mA and the end value to 0 mA or 4 mA.
• Measuring overrange, which extend over the described linear range, cannot be evaluated. In the
case of such overrange, the specified value is constantly output.