Installation – Rockwell Automation 937CU-AITXF-DC1 Transmitter Supply Converter Installation Instructions User Manual
Page 6
Advertising
4
Bul. 937C Transmitter Supply Converter Installation Instructions
Installation
The
Transmitter Supply Converter can be mounted on a 35 mm standard rail corresponding to DIN EN
60175. The devices must be snapped onto the rail vertically, and never slanted or tipped to the side.
CORRECT: Device
snapped on vertically.
INCORRECT: Device snapped
on from the side. Can damage
the contacts and cause the
device to fail.
Advertising