Rockwell Automation 1329I DeviceNet Option FRN 1.XXX - Manual (Page 20)

3-2 Configuring the 1329I Unit and DeviceNet Option
Going Online with
DeviceNet Manager You can configure a 1329I unit/DeviceNet option device offline and then
download the configuration, or you can configure it online. We recommend
configuring it online.
1. Start DeviceNet Manager.
2. Select Utilities > Set Up Online Connection to display the DeviceNet
Driver Selection dialog box.
Figure 3.1 DeviceNet Driver Selection Dialog Box
3. Under Available DeviceNet Drivers, select a DeviceNet driver, and then
click OK. The Driver Configuration dialog box appears.
Figure 3.2 Driver Configuration Dialog Box
4. Select the appropriate settings for the following:
5. Click OK to go online. The online icon is displayed under Comm in the
lower right corner of the main window.
Figure 3.3 DeviceNet Manager in Online Mode Icon
Box Description
Serial Port Setup Select the communications port on your computer to which the
DeviceNet adapter is connected.
Baud Rate Select the baud rate that is used by your computer communications port.
Node Address Type a unique node address for the computer on the DeviceNet network.
Usually, computers use the node address 62. Do not use 63 because
this is the factory-default setting for new devices on the network.
Data Rate Select the data rate that devices on the DeviceNet network are using.
5