Rockwell Automation 1329I DeviceNet Option FRN 1.XXX - Manual (Page 36)

4-6 Configuring a Scanner
The Datatable Map dialog box appears.
Figure 4.10 Datatable Map Dialog Box
2. Next to Display Mode, select Data Entry. A dot appears in the circle.
3. Next to Data Map, select Input to map the input data.
4. In the Map Data to box, select where the data is to be placed. In our
example, we will choose Discrete.
5. In the Map Data From box, select from where the data is received. In our
example, it is from a Poll Message.
6. In the I:1. box, type the word where the data will be mapped. In our
example, it is mapped to word 1(second word).
7. In the Bit box, type the bit at which the data starts. In our example, the
data will start at bit 0.
8. In the No. Bits box, type the number of bits that your data requires. In
our example, 32 bits will be used.
9. Click Apply Segment. A new datatable map appears in the dialog box.
Figure 4.11 Input Datatable Map
2
3
4
5
6 7 8
9