Rockwell Automation 1769-IF16V Compact High Density Analog Voltage Input Module - Manual (Page 6)

6
Compact High-density Analog Voltage Input Module
Publication 1769-IN086A-EN-P - August 2008
Simplified Input Circuit Diagram
Install the 1769-IF16V Module
Follow these steps to install the module.
1. Add the module to the 1769 system.
You can add the module before or after mounting.
2. Mount Expansion I/O.
•
Panel mount
•
DIN-rail mount
3. Make field wiring connections.
4. Configure the module.
This publication describes these steps in detail.
Adding the Module to the 1769 System
Attach the module to the controller or an adjacent I/O module before or after
mounting. For mounting instructions, see
Use the Dimensional Template , or Mount
the Module to a DIN Rail . To work with a system that is already mounted, see
Replace a Single Module Within a System .
10 M
IN+
COM
0.1 μ F
200 20 K
+
-
20 K
V
LOCAL
V
LOCAL
V
LOCAL
V
LOCAL
Gain A/D
M
u
l
t
i
p
l
e
x
e
r