Mounting expansion i/o, Minimum spacing, Mount the module to a panel – Rockwell Automation 1769-IF16V Compact High Density Analog Voltage Input Module User Manual
Page 9
![background image](/manuals/579380/9/background.png)
Compact High-density Analog Voltage Input Module 9
Publication 1769-IN086A-EN-P - August 2008
Mounting Expansion I/O
Minimum Spacing
Maintain spacing from enclosure walls, wireways, or adjacent equipment. Allow
50 mm (2 in.) of space on all sides for adequate ventilation, as shown.
Mount the Module to a Panel
Mount the module to a panel using two screws per module. Use M4 or #8 panhead
screws. Mounting screws are required on every module.
ATTENTION
During panel or DIN rail mounting of all devices, be sure that all debris,
that is, metal chips or wire strands, is kept from falling into the module.
Debris that falls into the module could cause damage when cycling
power.
Controller
Bottom
Side
Side
Top
Co
mp
ac
t I
/O
Co
mp
ac
t I
/O
Co
mp
ac
t I
/O
Co
mp
ac
t I
/O
En
d C
ap
Co
mp
ac
t I
/O