Rockwell Automation 1756-CN2RXT ControlLogix-XT ControlNet Interface Module, Series B Installation Instructions - Manual (Page 11)

ControlLogix-XT ControlNet Interface Module 11
Publication 1756-IN634A-EN-P - April 2009
Parts
To use your ControlNet module, you need these system components.
Set the Module’s Network Address
Use a small screwdriver to set the module’s network address
switches. For modules in a standalone chassis, you must specify a
unique ControlNet network address. You can select an address of
01...99 for modules in a standalone chassis. Address 00 is an invalid
ControlNet address.
This example shows the network address switches set to 23.
X T X T X T X T X T
-
1756-CN2RXT
1756-A5XT or 1756-A7LXT
1756-PBXT
1786-TPR, 1786-TPS, 1786-TPYR, or 1786-TPYS
Top of Module