Preventing electrostatic discharge, About the controllogix-xt controlnet module – Rockwell Automation 1756-CN2RXT ControlLogix-XT ControlNet Interface Module, Series B Installation Instructions User Manual
Page 6
6 ControlLogix-XT ControlNet Interface Module
Publication
1756-IN634A-EN-P - April 2009
Preventing Electrostatic Discharge
About the ControlLogix-XT ControlNet Module
Configure and use the 1756-CN2RXT module as you would a
traditional 1756-CN2R/B module. For more information about
configuring and using the 1756-CN2RXT and 1756-CN2R/B modules,
see the ControlNet Modules in Logix5000 Control Systems User
Manual, publication
ATTENTION
This equipment is sensitive to electrostatic discharge, which can cause
internal damage and affect normal operation. Follow these guidelines when
you handle this equipment:
•
Touch a grounded object to discharge potential static.
•
Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on component boards.
•
Do not touch circuit components inside the equipment.
•
Use a static-safe workstation, if available.
•
Store the equipment in appropriate static-safe packaging when not in
use.