Rockwell Automation 1756-DNB ControlLogix DeviceNet Scanner Module Installation Instructions - Manual (Page 12)

12 ControlLogix DeviceNet Scanner Module
Publication 1756-IN566D-EN-P - June 2008
Set the Rotary Switch
Use the communication (data) rate rotary switch to change the
communication rate.
1. If the module is removed from the chassis, be sure that power is
removed or the area is nonhazardous before proceeding.
2. Move the rotary switch to the desired position.
3. If necessary, reinstall the module into the chassis.
Use RSNetWorx for DeviceNet Software
Follow this procedure to use RSNetWorx for DeviceNet software to set the
communication rate.
For more information, refer to the DeviceNet Modules in Logix5000 Control
Systems User Manual, publication
DNET-UM004 .
1. In RSNetWorx for DeviceNet software, select the 1756-DNB scanner
module.
2. Select Tools and Node Commissioning.
3. Browse to the DeviceNet network for the 1756-DNB scanner module
you want to commission.
4. Select the 1756-DNB scanner module you want to commission.
TIP For ease of access, remove the module from the chassis before proceeding.