Rockwell Automation 1771ACN/B_1771ACNR/B,D17716.5.123 U.MNL CONTROLNET ADAPTER User Manual
Page 17
Advertising
Installing Your ControlNet Adapter Module
2–3
Publication 1771-6.5.123 – May 1996
You can change the position of these bands if subsequent system
design and rewiring makes insertion of a different type of module
necessary.
Figure 2.1
Keying Band Positions
Upper Connector
ATTENTION:
Insert or remove
keying bands with your fingers.
I/O chassis
Keying Bands
Lower Connector
11022-I
Place keying bands between:
•
54 and 56 on the upper connector
•
16 and 18 on the lower connector
Advertising