Rockwell Automation 1771ACN/B_1771ACNR/B,D17716.5.123 U.MNL CONTROLNET ADAPTER - Manual (Page 53)

Publication 1771-6.5.123 – May 1996
A
addressing
1–slot, 3–7
with 32–point modules, 3–8
1/2–slot, 3–9
2–slot, 3–3
using 16–point modules, 3–6
with 8–point modules, 3–4
guidelines for selecting addressing
modes, 3–11
I/O groups, 3–2
addressing hardware, 3–1
B
backplane switch assembly
description, 2–4
settings for PLC–5/15, 2–4
C
catalog numbers
1786-TPR, 2–6
1786-TPS, 2–6
1786-TPYR, 2–6
1786-TPYS, 2–6
chassis locking bar, 2–5
chassis switches, setting, 2–4
CIO instructions, using, 4–3
components, hardware, 1–1
configuration plug
I/O chassis power supply, 2–5
power supply, 2–4
connectors, ControlNet, 1–3
D
data transfer
discrete I/O, 4–2
nondiscrete I/O, 4–3
diagnostic indicators, 1–2
display mnemonics, 5–2
F
factors to consider, 4–2
G
groups, I/O, 3–2
guidelines, addressing mode selection,
3–11
I
I/O addressing, 3–1
I/O combinations
1-slot addressing, 3–9
1/2-slot addressing, 3–10
2-slot addressing, 3–3
I/O groups, 3–2
I/O map table, 4–1
I/O mapping
discrete data transfer, 4–2
nondiscrete data transfer, 4–3
I/O racks, 3–2
indicators, 5–1
installing the module, 2–5
instructions, CIO, 4–3
K
keying bands, 2–1
M
module switches, setting, 2–3
N
network access port, 1–3
network addresses, acceptable, 2–3
network number, assigning, 2–3
nondiscrete I/O communication, example,
4–5
nondiscrete I/O data transfers, factors to
consider, 4–6
nondiscrete mapping, 4–4
O
OK indicator, 5–2
Index