Rockwell Automation 1756-HYD02 ControlLogix Hydraulic Servo Module - Manual (Page 5)

ControlLogix™ Hydraulic Servo Module 5
Publication 1756-IN580A-EN-P - March 2003
Identify Module Components
You received two components with your order:
· 1756-HYD02 module
· RTB door label
If you did not receive these components, contact your Rockwell
Automation representative.
This module mounts in a 1756 chassis and uses a separately-ordered
RTB or a Bulletin 1492 Interface Module (IFM)
(1)
to connect all
field-side wiring. This module uses one of the following RTBs:
· 1756-TBCH 36 position Cage clamp RTB
· 1756-TBS6H 36 position Spring clamp RTB
Use an extended-depth cover (1756-TBE) for applications with heavy
gauge wiring or requiring additional routing space. When using an
IFM, consult the documentation that came with it to connect wiring.
(1)
The Bulletin 1492 IFM may not be used in any application that requires agency certification of the
ControlLogix system. Use of the IFM violates the UL, CSA and FM certifications of this product.
IMPORTANT
Before you install your module, you should:
· install and ground a 1756 chassis and power supply.
· order and receive an RTB or IFM, and its
components, for your application.