Termination panel – Rockwell Automation 1784-PM02AE PCI 2 Axis Servo Card User Manual
Page 10
10 PCI 2 Axis Servo Card
Publication 1784-IN005B-EN-P- July 2002
5. Replace the computer’s cover (after computer boots up
correctly).
Termination Panel
The termination panel is used in conjunction with the 1784-PM02AE
card to facilitate the wiring of drives and encoders for use with the
card. Because the card is installed inside the PC computer cabinet it
would be difficult to access for wiring drives, encoders, etc. A
termination panel, mounted separately from the card, allows for
easier access to the two axis terminals.
Figure 3 1784-PM02AE-TP0x Termination Panel
hangs up
•
you probably have a memory or I/O conflict.
•
You should remove all other cards and try
again.
If you continue to experience difficulty, call
Tech Support.
If the computer
then:
77.00 mm
113.00 mm Max
P2
P3
P4
P1
L1