Rockwell Automation 1784-PM02AE PCI 2 Axis Servo Card - Manual (Page 5)

PCI 2 Axis Servo Card 5
Publication 1784-IN005B-EN-P- July 2002
Heavy Industrial Environment
The PCI Servo card is intended for use in a heavy industrial
environment and is not to be used in a domestic or office
environment. The card must be installed in a suitable industrial
computer.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of EN 60204 Safety of
machinery - Electrical equipment of machines.
For specific information required by EN 60204, see the appropriate
sections in this publication, as well as the following Allen-Bradley
publications:
• Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
• Automation Systems Catalog, publication B111
This equipment is classified as open equipment and must be
installed (mounted) in an enclosure during operation as a means of
reducing user exposure to hazards.
Preventing Electrostatic Discharge
Follow these guidelines when you handle the 2 Axis Servo card:
• Before you handle the card, touch a grounded object to
discharge potential static.
• Wear an approved grounding wrist strap.
ATTENTION
!
This card is highly sensitive to electrostatic
discharge (ESD). Electrostatic discharge may be
present whenever you handle the card. When you
handle the card without any ESD protection you
can cause internal circuit damage that may not be
apparent when you install or initially use the card.