Typical configurations, Dl40 plus to dl5 slave, Panelview to dl5 slave – Rockwell Automation 2706-D11JS_D21JS Dataliner DL5 Slave Displays User Manual
Page 10: Typical configurations -4, Dl40 plus to dl5 slave panelview to dl5 slave, Here are some of the most typical applications, Plc, pc, or other device to dl5 slave
Advertising
Publication 2706-6.4
1-4
Introduction to the DL5 Slave
Typical Configurations
Here are some of the most typical applications:
DL40 Plus to DL5 Slave
PanelView to DL5 Slave
PLC, PC, or Other Device to DL5 Slave
DL40 Plus (Master)
DL5 Slave
PRESS #1 STOPPED
RS-232 (point-to-point)
Host Controller or Personal Computer
Triggering Messages
RS-485 (multi-drop)
DL5 Slave
DL5 Slave
RS-232
RS-232
RS-485/RS-232
Black Box Converter
Model# LD-485A-MP
RS-485/RS-232
Black Box Converter
Model# LD-485A-MP
Note: You can use either the
RS-232 or the RS-485 port.
You cannot use both ports
SYSTEM CHECK
NORMAL
DL5 Slave
INLET VALVE
RS-232
Printer Port
12:48 09/16/98
DL5 Slave
RS-232 (point-to-point)
PLC, Personal Computer,
or other device providing
ASCII message packets
Alarm Reset
6:40 AM 11/17/98
Advertising