Rockwell Automation 2706-D11JS_D21JS Dataliner DL5 Slave Displays - Manual (Page 24)

Publication 2706-6.4
3-4 Configuring the DL5 Slave
DL5 Configuration Menu
Important: Make sure you return the Operate / Configure switch (position
1) to the up (Operate) position after configuring the DL5 slave.
MODE= DL SLAVE
Start of Menu
MODE= PV SLAVE
MODE= TERMINAL
[Space Bar]
[Space Bar]
[Space Bar]
ADDRESS= XXX
BAUD= 9600
Press [SpaceBar] to
scroll through baud rates
ENABLE CURSOR? Y
BAUD= 9600
Press [SpaceBar] to
scroll through baud rates
AUTO NEW LINE? Y
MODE= PV SLAVE
ENABLE CURSOR? Y
BAUD= 9600
Press [SpaceBar] to
scroll through baud rates
AUTO NEW LINE? Y
Press [Y] or [N] then
press [Enter]
MODE= TERMINAL
[Enter]
[Enter]
[Enter]
Press [Y] or [N] then
press [Enter]
Press [Y] or [N] then
press [Enter]
Press [Y] or [N] then
press [Enter]
Enter 3-digit address
and press [Enter]
MODE= DL SLAVE
MODE= DIAGNOSTIC
[Space Bar]
[Enter]
BAUD= 9600
Press [SpaceBar] to
scroll through baud rates
[Enter]