Rockwell Automation 2706-D11JS_D21JS Dataliner DL5 Slave Displays - Manual (Page 7)

Publication 2706-6.4
Chapter
1
Introduction to the DL5 Slave
Chapter Objectives This chapter describes the DL5 Slave display and summarizes its
capabilities. The following topics are included in this chapter:
• DL5 Slave description
• Operating modes
• Features
• Typical configurations
Description The DL5 Slave displays are available in one-line and two-line versions.
These displays are designed for panel mounting in industrial environments
and require a 12-24V DC power source.
DL5 Slave displays receive message text from a host device. The host
device may be a DL40 Plus master display, PanelView terminal,
programmable controller, or a personal computer. All messages are created
and stored in the host device.
The DL5 Slave displays appear similar to the standard DL5 one and
two-line displays except they do not have a parallel port.
2706-D11JS
2706-D21JS