Rockwell Automation 2706-D11JS_D21JS Dataliner DL5 Slave Displays - Manual (Page 6)

Publication 2706-6.4
P-2 Using this Manual
Intended Audience No specialized knowledge is required to configure and install the DL5 slave
display. However, we assume the following:
• The person responsible for equipment connections is familiar with
standard wiring practices and electrical codes in your area.
• Communication cabling is done by a person having an understanding of
basic communications terminology and cabling.
• Panel cutouts are made using the same methods and safety practices
followed for other panel mounted equipment.
Conventions Used The following conventions are used in this manual.
• The up caret, ^, may be used in place of [Ctrl] (Control key) where
space is limited.
• Values in a hexadecimal format have the suffix “hex”.
• Keys on your keyboard are shown in brackets. For example “press [Y]
to acknowledge message”.
• [Enter] refers to the return key on your keyboard.
Related Publications You may need to refer to the following related publications:
Publication Title Description
Publication
Number
Dataliner DL40 Plus Message
Display User Manual Provides installation, wiring and operating
instructions for the DL40 Plus display (not
slave display). Also describes use of the
onboard message editor. 2706-6.1
DL40 Plus Off-line
Programming Software User
Manual Describes the installation and use of the
DOS based message development
software for the DL40 Plus. 2706-6.2
BASIC Module (Catalog No.
1771-DB) User Manual Operating instructions for the PLC-5
BASIC module. 1771-6.5.113
SLC500 BASIC Module (Catalog
No. 1746-BAS) User Manual Operating instructions for the SLC 500
BASIC module. 1746-6.1
PLC-5 Programmable Controller
(Catalog No. 1785-LT2) Quick
Reference PLC5 Programmable Controller reference. 1785-7.1
PanelBuilder Software
User Manual Describes how to output messages to the
PanelView printer port for display on the
DL5 Slave. 2711-6.0
PanelBuilder 1400e
Configuration Software for
Windows User Manual Provides useful information when using a
PanelView enhanced terminal as a master
for a DL5 Slave. 2711e-819