Rockwell Automation AutoMax Enhanced Ladder Editor - Manual (Page 25)

2Ć7
2.7 Selecting Instructions
Before you can copy, cut, clear, or move an instruction, you must
first select it.
To select an instruction
D Click on any part of the instruction such as the instruction itself, a
variable used in the instruction, or the description.
or
D Draw a selection box around the instruction. A selection box is a
dottedĆline rectangle like this:
A selected instruction looks like this:
To select an instruction by drawing a selection box
Step 1.
Think of the instruction you want to select as being
enclosed in a box and position the pointer on the white
space at either the top or bottom corners."
Step 2. Press the left mouse button. The cursor changes to +.
Step 3. Draw a selection box around the instruction by moving
the mouse diagonally across the instruction. Once the
instruction is enclosed in the box, release the mouse
button. The instruction is now selected.