Rockwell Automation AutoMax Enhanced Ladder Editor - Manual (Page 39)

3Ć5
To define the print options
Step 1.
Access the Print Option Tab by choosing:
D Options from the Tools menu and then the Print Tab
or
D the Options button on the Print dialog box
Step 2. Choose the items you wish to print when you print a
program. Your choices are listed within the Print What
group box.
Step 3. Click OK.
The options you choose apply to any program that you print.
Tip
To return to using the default print options, select the Use Defaults
button.
3.3 Defining the Page Setup
You can change the page margins for the paper copies of the
programs that you print.
The default margins are:
D top and bottom margins, 1 inch
D left and right margins, 0.5 inches.
Once you set the page margins, they apply to all subsequent
programs that you print.
To set the page margins for the programs that you print
Step 1.
Do one of the following:
D Click on
or
D From the File menu, choose Print
or
D Press CTRL+P
Step 2. At the Print dialog box, choose Page Setup.
Step 3. Enter the new measurements for the top, bottom, left and
right margins.
Note: If you choose margins that are less than the
printable area on the printer/paper, the printout is still
printed, but the measured margin may not accurately
match your selections.
Step 4. Click OK.